Having a car is like having a second home. You don’t just want it to be clean, you also want it to look good. If your headlights are dull and yellowed, they can greatly detract from the appearance of your vehicle. However, there are ways to restore them while keeping the safety factor in mind!
In this post we will go over some tips on how to choose a restoration kit that’s right for you and how to use it properly so that you can get those headlights looking good as new without breaking anything else on your car along the way!
- Avoid sanding. While you may be tempted to reach for a sand paper, it’s actually not the best way to go about restoring your headlights. Remember that they’re made of plastic and can be easily damaged by rough surfaces or sharp edges. Instead, use a polishing pad that’s just as soft as the headlight itself, which will remove oxidation without scratching anything else.
- Go slowly and use caution when buffing out scratches or marks on your headlights—you don’t want to create any new damage! Also keep in mind that it’s never a good idea to use anything abrasive like steel wool pads or wire brushes when cleaning up cloudy headlights; these types of products can scratch away at the surface of the plastic causing permanent damage (and making them look even worse than before).
Avoid liquid cleaners.
What you shouldn’t do is use any kind of liquid cleaner. This may sound obvious, but some people are used to wiping their headlights with paper towels and then washing them off with water.
You should avoid this method because it can actually damage your headlight covers (the plastic coverings over the light bulbs) and even crack them if they’re old or dry out too much.
Instead, use a non-abrasive cleaning agent such as Meguiar’s Headlight Cleaner or Turtle Wax Headlight Cleaning Kit, which does not contain any ammonia-based chemicals that could damage the plastic on your car’s headlights. The best way to clean your headlights is by using microfiber towels like these from Amazon: https://amzn.to/2MmIoNu
Don’t use paper towels- use microfiber towels.
- Don’t use paper towels to clean your headlights. While paper towels may soak up more water than microfiber, it will scratch the headlight surface.
- Microfiber is a better material for cleaning and drying your headlights because it’s gentler on the surface and more absorbent than paper towels. In addition, it can be reused over and over again without losing its softness or absorbing too much moisture from your headlight lens when you’re wiping off water spots after using the polishing compound in your kit.
Know your vehicle’s materials.
As with any product, it’s important to know the limitations of your color headlight restoration kit. Some plastics are more sensitive to chemicals than others, and some are more sensitive to heat than others.
Certain materials can’t handle UV light very well, while others have a tendency to scratch easily. Be sure that you know what type of plastic your headlights are made out of before trying anything too aggressive!
Remove rust from the surface before applying a restoration kit.
Before applying a restoration kit, you should remove any rust from the surface of your headlight. You have three main options here:
- Use a rust remover to dissolve the rust and make it easier to wipe away with a cloth. Some people find this method works well but others think that it can leave behind residue that is difficult to clean off later.
- Use a wire brush or sandpaper to physically remove the rust from your headlight. You could also use a toothbrush or toothpick if you don’t want to invest in these tools just for this project!
Don’t wax your headlights unless you want to break them.
Waxing headlights is a popular choice for cleaning and protecting the surface of the headlight. But, it can be bad for your headlights. Some waxes don’t play well with glass, making them more susceptible to leaking. If you do want to wax your headlights, make sure you use a sealant or coating instead of regular car wax.
If you want to keep them looking clean and shiny without any risk of damaging your lights, we recommend using a light polish instead of a heavy-duty cleaner like Turtle Wax or Meguiar’s Gold Class Cleaner & Polish Kit.
Don’t rush it- this is a process that takes time and attention to detail.
- Don’t rush it- this is a process that takes time and attention to detail
- It can take several hours to complete
- Don’t rush the process or you will end up with a mess
- It is best to start with a clean surface before you begin
- Don’t use harsh chemicals on your headlights
Always do your research on what kind of products you are using on your car, especially when it comes to the headlights.
To ensure you get the best results from your color headlight restoration kit, it’s important to always do your research on what kind of products you are using on your car. This includes researching the specific product that is right for your car and climate.
For example, if you live in an area where it rains frequently or snows regularly, a headlight restoration kit designed for dry climates may not be suitable for use in those conditions.
With all of the expensive options out there, how do we know which one is right for you? It all depends on what type of vehicle you have, how much time and money you want to spend on a restoration kit, and whether or not you want to do it yourself. If you’re looking for something simple (and affordable), then try out some household products like baking soda or toothpaste before going through any elaborate process. If this doesn’t work then consider hiring someone who knows what they’re doing with their hands!